April 30th, 2011

Following pigments are overstocked at our company and we would like to offer them to the public:

• Pigment Yellow 138 - 280-300 C Heat Stability for Plastics and Fibers
• Pigment Red 48:2 - 180 C Heat Stability for PVC/EVA Plastics and Inks
• Pigment Red 57:1 - 160 C Heat Stability for PVC/EVA Plastics and Inks
• OB-1 - Optical Brightener Agent (OBA 393) for All Plastics and Fibers
• OB - Optical Brightener Agent (OBA 184) for PE and PP Plastics and Fibers
• Solvent Brown 53 - For PET Staple Fibers and PET Bottles/Sheets
• Pigment Yellow 34 (Lemon Yellow)- 260 C Heat Stability for PE, EVA, PVC and PP Plastics



February 8th, 2011

Setas Masterbatch is proud to announce new products for the Recycled PET industry:

 PET IV Enhancer - this product can be used for increasing IV of the PET flakes during extrusion process.

 PET Optical Brightener - this product can be used to enhance optical properties of the PET flakes.

December 15th, 2010

Setas Masterbatch has developed the following products for the BOPET Film Industry:

Masterset White 1 BOPET-50, a special opaque white masterbatch with 50% TiO2 loading designed specially for the BOPET film industry.  LDR is 10-20%.

Masterset White 1 BOPET-BA, masterbatch with 50% BaSo4 loading designed specially for BOPET Film industry.  LDR is 8-15%.

 We currently have a special FR masterbatch project under development for the BOPET Film industry.

June 1st, 2010

Starting June 1, 2010 all plastics related masterbatches for the Turkish local market will be sold by our sales company, Masterset Plastik Sanayi ve Ticaret Limited Şirketi.  For more info, please visit: www.masterset.com.tr

All local Turkish plastics masterbatch inquiries should be directed to Masterset Company.  Technical service will be provided by Setaş Masterbatch.

July 15th, 2009

Setas Masterbatch is proud to announce an excellent antiblocking masterbatch for PET sheet extrusion:

Product Code: MB819

Product Name: Masterset PET Antiblock

This product can also be used as mold release agent for PET Bottles.  Typical let down ratio is between 1-3%. For PET sheets, we recommend 1-2%.

Key Benefits

• Decreased surface friction and mold release force by 60%
• Improved packing and processing of molded parts
• Reduced scratch and scuff and enhanced surface quality
• Easier processing and reduced manufacturing noise
  

No effect on Physical Properties of PET

• Excellent color and clarity
• No increase in acetaldehyde generation
• No effect on intrinsic viscosity
• No effect on injection pressure

• Increased packing density of preforms by 25%
• Reduced Scratching and waste
• Improved Flow of the finished bottles

For more information about pricing please contact us at:

info@setasmasterbatch.com